Search by Certificate Number

Notifier by Honeywell, Pittway Tecnologica Srl

Via Caboto 19/3
Trieste
34147
Italy

Tel: +44 (0)1444 230300 • Fax: +44 (0)1444 230888
Email: sales@notifiersystems.co.uk • Web: www.notifierfiresystems.co.uk

Additional Addresses

Charles Avenue
Burgess Hill
West Sussex
RH15 9UF
United Kingdom

Tel: +44 (0)1444 230230 • Fax: +44 (0)1444 230689
Email: sales@notifierfiresystems.co.uk • Web: www.notifierfiresystems.co.uk


Certificate No 567aw-(cl-2) to EN 54-3:2014 + A1:2019
Certificate No 567ag-(cl-2) to EN 54-3:2014 + A1:2019, EN 54-17:2005 & EN 54-23:2010

Certificate No 567z-(cl-2) to EN 54-3: 2014 + A1: 2019 and EN 54-17: 2005
Certificate No 567ah-(cl-2) to EN 54-17:2005 & EN 54-23: 2010
Certificate No 567ay-(cl-4) to EN 54-3:2014 + A1:2019 & EN 54-23:2010
Certificate No 567az-(cl-3) to EN 54-3:2014 + A1:2019, EN 54-17:2005, EN 54-23:2010
Certificate No 567ah-(cl-2) to EN 54-17:2005, EN 54-23:2010


Audible Warning Devices

Product Description LPCB
Ref. No.
NFXI-WS-z

Analogue addressableType A/B wall mounted sounder with short circuit isolator

(B501AP-cc, Bcc bases, and Wcc bases)

Notes:

1. z indicates body colour. R=Red, W=Pure White

2  Advanced Protocol (and System Sensor 500 series protocol)

3. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDC and tones:

        1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;

        4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;

        7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;

        11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;

        12) 420Hz, 0.625s on, 0.625 sec off; 13) 500-1200Hz, 0.25 sec off, 3.75 sec on;

        14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;

        16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;

        18) 970, 1Hz 500ms on, 500ms off;

        19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;

        20) 800Hz;  21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;

        22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;

        24) 500 - 1200Hz, (0.5s off, 3.5s on);

        25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;

        27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;

        29) 500 - 1000, 7Hz;

        30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;

        31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.

4.  Approved as Type B only when used with Wcc base.

567z/09
NFXI-WSF-zz

Analogue addressable Type A/B wall mounted sounder/strobe with short circuit isolator

(B501AP-cc, Bcc bases, and Wcc bases)

Notes:

1. zz indicates body/lens colour. RR=Red/Red, WC=Clear/Clear

2. Advanced Protocol (and System Sensor 500 series protocol)

3. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDC and tones:

        1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;

        4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;

        7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;

        11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;

        12) 420Hz, 0.625s on, 0.625 sec off;

        13) 500-1200Hz, 0.25 sec off, 3.75 sec on;

        14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;

        16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;

        18) 970, 1Hz 500ms on, 500ms off;

        19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;

        20) 800Hz;  21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;

        22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;

        24) 500 - 1200Hz, (0.5s off, 3.5s on);

        25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;

        27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;

        29) 500 - 1000, 7Hz;

        30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;

        31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.

4. Certification excludes the strobe function.

5.  Approved as Type B only when used with Wcc base.

567z/10
NFXI-BS-zz

Analogue addressable Type A integrated detector base sounder with short circuit isolator

(B501AP-cc, Bcc and Wcc bases)

Notes:

1. zz indicates body colour. W=Pure White, IV=Detector White

2  Advanced Protocol (and System Sensor 500 series protocol)

3. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDC and tones:

        1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;

        4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;

        7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;

        11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;

        12) 420Hz, 0.625s on, 0.625 sec off; 13) 500-1200Hz, 0.25 sec off, 3.75 sec on;

        14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;

        16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;

        18) 970, 1Hz 500ms on, 500ms off;

        19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;

        20) 800Hz;  21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;

        22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;

        24) 500 - 1200Hz, (0.5s off, 3.5s on);

        25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;

        27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;

        29) 500 - 1000, 7Hz;

        30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;

        31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.

567z/11
NFXI-BSF-zzz

Analogue addressable Type A integrated detector base sounder/strobe with short circuit isolator

(B501AP-cc, Bcc and Wcc bases)

Notes:

1. zzz indicates body/lens colour. WC=Pure White/Clear, IVC=Detector White/Clear

2. Advanced Protocol (and System Sensor 500 series protocol)

3.  Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDC and tones:

        1) 554/440, 2Hz (100ms/400ms); 2) 800/970, 1Hz; 3) 800/970, 2Hz;

        4) 2400/2900, 3Hz; 5) 2500/3100, 2Hz; 6) 988/645, 2Hz;

        7) 660Hz; 8) 970Hz; 9) 1200Hz; 10) 2850Hz;

        11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;

        12) 420Hz, 0.625s on, 0.625 sec off; 13) 500-1200Hz, 0.25 sec off, 3.75 sec on;

        14) 660, 3.33Hz, 150ms on, 150ms off; 15) 970, 0.8Hz 0.25s on, 1s off;

        16) 970, 0.5Hz 1s on, 1s off; 17) 2850, 1Hz;

        18) 970, 1Hz 500ms on, 500ms off;

        19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;

        20) 800Hz;  21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;

        22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off; 23) 2400 - 2850, 7Hz;

        24) 500 - 1200Hz, (0.5s off, 3.5s on);

        25) 800 - 970, 50Hz; 26) 800 - 970, 7Hz;

        27) 800 - 970, 1Hz; 28) 2400 - 2850, 50Hz;

        29) 500 - 1000, 7Hz;

        30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;

        31) 800 - 1000, 2Hz; 32) 2400 - 2850, 1Hz.

4.  Certification excludes the strobe function.

567z/12
NFXI-WF-WC

Analogue addressable wall mounted LED strobe with short circuit isolator (B501AP base)

Note:

1.  The wall mounted VAD meets the requirements of EN 54-23: 2010

     for the following category (light pattern details):
     - Category O-2.4-2
     - Flash rate 1Hz

     - Synchronization

2.  Type A with Bcc deep back box, Type B with Wcc deep back box

567ah/05
NFXI-WSF-WC

Analogue Addressable Wall Mounted Sounder / LED Strobe with Short Circuit Isolator (B501AP base)

Notes:

1. The wall mounted VAD meets the requirements of EN 54-23: 2010 for the following category (light pattern details):

- Category O - Open Class

- Flash rate 1Hz

- Synchronization

2. WC=Pure White/Clear indicates body/lens colour.

3. Type A with Bcc deep back box, Type B with Wcc deep back box

4. Meets the requirements of EN54-3: 2001 at the following tones:

1) Alternating 525/440, 2Hz (100ms/400ms);

2) Alternating 800/922, 1Hz;

3) Alternating 800/922, 2Hz;

4) Alternating 2400/2900, 3Hz;

5) Alternating 2500/3100, 2Hz;

6) Alternating 988/645, 2Hz;

7) Continuous 630Hz;

8) Continuous 922Hz;

9) Continuous 1200Hz;

10) Continuous 2810Hz;

11) Sweep 150-1000Hz, rise 10s, stable 40s, fall 10s, stable 20s, then

repeating;

12) Intermittent 420Hz, 0.625s on, 0.625 sec off;

13) Sweep 500-1200Hz, 0.25 sec off, 3.75 sec on;

14) Intermittent 630, 3.33Hz, 150ms on, 150ms off;

15) Intermittent 922, 0.8Hz 0.25s on, 1s off;

16) Intermittent 922, 0.5Hz 1s on, 1s off;

17) Intermittent 2810, 1Hz;

18) Intermittent 922, 1Hz 500ms on, 500ms off;

19) Intermittent 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;

20) Continuous 800Hz;

21) Sweep 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;

22) Sweep 1200 - 500Hz, 0.99Hz 1s on, 0.01s off;

23) Sweep 2400 - 2850, 7Hz;

24) Sweep 500 - 1200Hz, (0.5s off, 3.5s on);

25) Sweep 800 - 970, 50Hz;

26) Sweep 800 - 970, 7Hz;

27) Sweep 800 - 970, 1Hz;

28) Sweep 2400 - 2850, 50Hz;

29) Sweep 500 - 1000, 7Hz;

30) Sweep 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;

31) Sweep 800 - 1000, 2Hz;

32) Sweep 2400 - 2850, 1Hz

567ag/21
NFXI-DSF-WC

Analogue Addressable Type A Integrated Detector Base Sounder/Beacon with Short Circuit Isolator (B501AP base)

Notes:

1. The wall mounted VAD meets the requirements of EN 54-23: 2010 for the following category (light pattern details):

- Category O - Open Class

- Flash rate 1Hz

- Synchronization

2. WC=Pure White/Clear indicates body/lens colour.

3. Advanced Protocol (and System Sensor 500 series protocol)

4. Meets the requirements of EN54-3 for all output levels at voltage range 15-29VDC and tones:

1) 554/440, 2Hz (100ms/400ms);

2) 800/970, 1Hz;

3) 800/970, 2Hz;

4) 2400/2900, 3Hz;

5) 2500/3100, 2Hz;

6) 988/645, 2Hz;

7) 660Hz;

8) 970Hz;

9) 1200Hz;

10) 2850Hz;

11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;

12) 420Hz, 0.625s on, 0.625 sec off;

13) 500-1200Hz, 0.25 sec off, 3.75 sec on;

14) 660, 3.33Hz, 150ms on, 150ms off;

15) 970, 0.8Hz 0.25s on, 1s off;

16) 970, 0.5Hz 1s on, 1s off;

17) 2850, 1Hz;

18) 970, 1Hz 500ms on, 500ms off;

19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;

20) 800Hz;

21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;

22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off;

23) 2400 - 2850, 7Hz;

24) 500 - 1200Hz, (0.5s off, 3.5s on);

25) 800 - 970, 50Hz;

26) 800 - 970, 7Hz;

27) 800 - 970, 1Hz;

28) 2400 - 2850, 50Hz;

29) 500 - 1000, 7Hz;

30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;

31) 800 - 1000, 2Hz;

32) 2400 - 2850, 1Hz

567ag/22
NFX-DSF-WC

Analogue Addressable Type A Integrated Detector Base Sounder/Beacon (B501AP base)

Notes:

1. The wall mounted VAD meets the requirements of EN 54-23: 2010 for the following category (light pattern details):

- Category O - Open Class

- Flash rate 1Hz

- Synchronization

2. PC=Pure White/Clear indicates body/lens colour.

3. Advanced Protocol (and System Sensor 500 series protocol)

4. Meets the requirements of EN54-3 for all output levels at voltage range 15-32VDC and tones:

1) 554/440, 2Hz (100ms/400ms);

2) 800/970, 1Hz;

3) 800/970, 2Hz;

4) 2400/2900, 3Hz;

5) 2500/3100, 2Hz;

6) 988/645, 2Hz;

7) 660Hz;

8) 970Hz;

9) 1200Hz;

10) 2850Hz;

11) 150-1000, rise 10s, stable 40s, fall 10s, stable 20s, then repeating;

12) 420Hz, 0.625s on, 0.625 sec off;

13) 500-1200Hz, 0.25 sec off, 3.75 sec on;

14) 660, 3.33Hz, 150ms on, 150ms off;

15) 970, 0.8Hz 0.25s on, 1s off;

16) 970, 0.5Hz 1s on, 1s off;

17) 2850, 1Hz;

18) 970, 1Hz 500ms on, 500ms off;

19) 950, 0.22Hz (0.5s on, 0.5s off) x 3, 1.5s off;

20) 800Hz;

21) 400-1200Hz, (0.5s on, 0.5s off) x 3, 1.5s off;

22) 1200 - 500Hz, 0.99Hz 1s on, 0.01s off;

23) 2400 - 2850, 7Hz;

24) 500 - 1200Hz, (0.5s off, 3.5s on);

25) 800 - 970, 50Hz;

26) 800 - 970, 7Hz;

27) 800 - 970, 1Hz;

28) 2400 - 2850, 50Hz;

29) 500 - 1000, 7Hz;

30) 500 - 1200 - 500, 0.166Hz rise 1s, stable 4s, fall 1s;

31) 800 - 1000, 2Hz;

32) 2400 - 2850, 1Hz

567ay/08
NFXI-BF-xCS

Addressable Type A Detector Base Strobe

Notes:

1. The Ceiling mounted VAD meets the requirements of EN 54-23:2010 for the following:

- Category rating C-3-8.5

- Synchronization

- Flash rate 0.5Hz & 1Hz

- Red LED

- Clear lens

2. x indicates body colour. D=Detector White, P=Pure White

567ah/07
NFXI-BSF-xCH

Addressable Type A Detector Base Sounder Strobe

Notes:

1. x indicates body colour. D = Detector White, P=Pure White

2. Meets the requirements of EN 54-3:2001 for the following tones:

Tone 1 - Alternating 525 / 440Hz in 100ms/400ms

Tone 2 - Alternating 800 / 922Hz for 1Hz

Tone 3 - Alternating 800 / 922Hz for 2Hz

Tone 4 - Alternating 2400 / 2900Hz for 3Hz

Tone 5 - Alternating 2500 / 3100Hz for 2Hz

Tone 6 - Alternating 988 / 645Hz for 2Hz

Tone 7 - Continuous 630Hz

Tone 8 - Continuous 922Hz

Tone 9 - Continuous 1200Hz

Tone 10 - Continuous 2810Hz

Tone 11 - Sweep 150-1000-500Hz Rising from 500Hz to 1000Hz in 10s,

Hold 100Hz for 40s

Falling from 100Hz to 500Hz in 10s,

Hold 500Hz for 20s

Tone 12 - Intermittent 420Hz for 150ms on, 150ms off

Tone 13 - Sweep 500-1200Hz Rising from 500Hz to 1200Hz in 0.25s, then 3.75s off

Tone 14 - Intermittent 630Hz for 150ms on, 150ms off

Tone 15 - Intermittent 922Hz for 0.25s on, 1s off

Tone 16 - Intermittent 922Hz for 1s on, 1s off

Tone 17 - Intermittent 2810Hz for 1Hz

Tone 18 - Intermittent 922Hz for 500ms on, 500ms off

Tone 19 - Intermittent 950Hz for 500ms on, 500ms off. Repeat 3 times then 1.5s off

Tone 20 - Continuous 800Hz

Tone 21 - Sweep 400-1200Hz Rising from 400Hz to 1200Hz in 500ms, then 500ms off. Repeat 3 times then 1.5s off

Tone 22 - Sweep 1200-500Hz Falling from 1200Hz to 500Hz in 1000ms, 10ms off

Tone 23 - Sweep 2400-2850Hz for 7Hz

Tone 24 - Sweep 500-1200Hz Rising from 500Hz to 1200Hs in 0.5s, then 3.5s off

Tone 25 - Sweep 800-970Hz for 50Hz

Tone 26 - Sweep 800-970Hz for 7Hz

Tone 27 - Sweep 800-970Hz for 1Hz

Tone 28 - Sweep 2400-2850Hz for 50Hz

Tone 29 - Sweep 500-1000Hz for 7Hz

Tone 30 - Sweep 500-1200-500Hz Rising from 500Hz to 1200Hz in 1s,

Hold 1200Hz for 4s

Falling from 1200Hz to 500Hz in 1s

Tone 31 - Sweep 800-1000Hz for 2Hz

Tone 32 - Sweep 2400-2850Hz for 1Hz

3. The Ceiling mounted VAD meets the requirements of EN 54-23:2010 for the following:

- Category ratings High C-3-15, Low C-3-11 & O-1-4

- Synchronization

- Flash rate 0.5Hz & 1Hz

- Red LED

- Clear lens

567ag/23
NFXI-BSF-xCS

Addressable Type A Detector Base Sounder Strobe

Notes:

1. x indicates body colour. Detector White, P=Pure White

2. Meets the requirements of EN 54-3:2001 for the following tones:

Tone 1 - Alternating 525 / 440Hz in 100ms/400ms

Tone 2 - Alternating 800 / 922Hz for 1Hz

Tone 3 - Alternating 800 / 922Hz for 2Hz

Tone 4 - Alternating 2400 / 2900Hz for 3Hz

Tone 5 - Alternating 2500 / 3100Hz for 2Hz

Tone 6 - Alternating 988 / 645Hz for 2Hz

Tone 7 - Continuous 630Hz

Tone 8 - Continuous 922Hz

Tone 9 - Continuous 1200Hz

Tone 10 - Continuous 2810Hz

Tone 11 - Sweep 150-1000-500Hz Rising from 500Hz to 1000Hz in 10s,

Hold 100Hz for 40s

Falling from 100Hz to 500Hz in 10s,

Hold 500Hz for 20s

Tone 12 - Intermittent 420Hz for 150ms on, 150ms off

Tone 13 - Sweep 500-1200Hz Rising from 500Hz to 1200Hz in 0.25s, then 3.75s off

Tone 14 - Intermittent 630Hz for 150ms on, 150ms off

Tone 15 - Intermittent 922Hz for 0.25s on, 1s off

Tone 16 - Intermittent 922Hz for 1s on, 1s off

Tone 17 - Intermittent 2810Hz for 1Hz

Tone 18 - Intermittent 922Hz for 500ms on, 500ms off

Tone 19 - Intermittent 950Hz for 500ms on, 500ms off. Repeat 3 times then 1.5s off

Tone 20 - Continuous 800Hz

Tone 21 - Sweep 400-1200Hz Rising from 400Hz to 1200Hz in 500ms, then 500ms off. Repeat 3 times then 1.5s off

Tone 22 - Sweep 1200-500Hz Falling from 1200Hz to 500Hz in 1000ms, 10ms off

Tone 23 - Sweep 2400-2850Hz for 7Hz

Tone 24 - Sweep 500-1200Hz Rising from 500Hz to 1200Hs in 0.5s, then 3.5s off

Tone 25 - Sweep 800-970Hz for 50Hz

Tone 26 - Sweep 800-970Hz for 7Hz

Tone 27 - Sweep 800-970Hz for 1Hz

Tone 28 - Sweep 2400-2850Hz for 50Hz

Tone 29 - Sweep 500-1000Hz for 7Hz

Tone 30 - Sweep 500-1200-500Hz Rising from 500Hz to 1200Hz in 1s,

Hold 1200Hz for 4s

Falling from 1200Hz to 500Hz in 1s

Tone 31 - Sweep 800-1000Hz for 2Hz

Tone 32 - Sweep 2400-2850Hz for 1Hz

3. The Ceiling mounted VAD meets the requirements of EN 54-23:2010 for the following:

- Category ratings C-3-8.5 & O-1-3

- Synchronization

- Flash rate 0.5Hz & 1Hz

- Red LED

- Clear lens

567ag/24
NBS3D

4 Tone Type A Conventional Ceiling Mounting Sounder (White)        

Note:

1.        Meets the requirements of EN 54-3 at all output levels, and voltage ranges of 10-14 VDC and 19.5-28VDC for the following tones:

-        Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence

-        800Hz continuous

-        500Hz-1200Hz slow whoop

-      Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence

567aw/02
WRA-PC-I02

Wall Mounted Sounder Strobe with Red Flash, Clear Lens, Isolated - Pure White Body (B501AP)

Notes:

  • Meets the requirements of EN 54-23 at the following power settings:
  • Low red output
  • Medium red output
  • High red output

2.     The wall mounted Visual Alarm Device (VAD) meets the requirements of EN 54-23 for the following light pattern details:

  -     High Performance setting - (Category W-4.2-11.5/W-2.4-11.5)

  -     Medium Performance setting - (Category W-3.6-10.5/W-2.4-10.5)

  -     Low Performance setting - (Category O-2.4-3)

  -     Synchronization

  -     Flash rate (0.5Hz & 1Hz)

3.    Meets the requirements of EN 54-3 at the following tones:

  • 1 - Alternating 554/440 2Hz (100ms/400ms)
  • 2 - Alternating 800/922 1Hz
  • 3 - Alternating 800/922 2 Hz
  • 4 - Alternating 2400/2900 3Hz
  • 5 - Alternating 2500/3100 2Hz
  • 6 - Alternating 988/645 2Hz
  • 7 - Continuous 630
  • 8 - Continuous 922
  • 9 - Continuous 1200
  • 10 - Continuous 2810
  • 11 - Sweep 150-1000 Rising from 150Hz to 1Khz in 10s, 40s@1KHz, falling from 1KHz to 150Hz in 10s, 20s@150Hz. Period 80s
  • 12 - Intermittent 420 0.625s on, 0.625s off
  • 13 - Sweep 500-1200 0.25s off, 3.75s on
  • 14 - Intermittent 630 3.33Hz 150ms on, 150ms off
  • 15 - Intermittent 922 0.8Hz 0.25s on, 1s off
  • 16 - Intermittent 922 0.5Hz 1s on, 1s off
  • 17 - Intermittent 2810 1Hz
  • 18 - Intermittent 922 1Hz 500ms on, 500ms off
  • 19 - Intermittent 950 0.22Hz (0.5s on, 0.5s off) rptx3, 1.5s off
  • 20 - Continuous 800
  • 21 - Sweep 400-1200 (0.5s on, 0.5s off)*3, 1.5s off
  • 22- Sweep 1200-500 0.99Hz 1s on, 0.01s off
  • 23 - Sweep 2400-2850 7Hz
  • 24 - Sweep 500-1200 (0.5s off, 3.5s on)
  • 25 - Sweep 800-970 50Hz
  • 26 - Sweep 800-970 7Hz
  • 27 - Sweep 800-970 1Hz
  • 28 - Sweep 2400-2850 50Hz
  • 29 - Sweep 500-1000 7Hz
  • 30 - Sweep 500-1200-500 0.166Hz rise 1s, stable 4s, fall 1s
  • 31 - Sweep 800-1000 2Hz
  • 32 - Sweep 2400-2850 1Hz
567az/01
WRA-RC-I02

Wall Mounted Sounder Strobe with Red Flash, Clear Lens, Isolated - Red Body (B501AP)

Notes:

1.      Meets the requirements of EN 54-23 at the following power settings:

  • Low red output
  • Medium red output
  • High red output

2.     The wall mounted Visual Alarm Device (VAD) meets the requirements of EN 54-23 for the following light pattern details:

  -     High Performance setting - (Category W-4.2-11.5/W-2.4-11.5)

  -     Medium Performance setting - (Category W-3.6-10.5/W-2.4-10.5)

  -     Low Performance setting - (Category O-2.4-3)

  -     Synchronization

   -     Flash rate (0.5Hz & 1Hz)

3.    Meets the requirements of EN 54-3 at the following tones:

  • 1 - Alternating 554/440 2Hz (100ms/400ms)
  • 2 - Alternating 800/922 1Hz
  • 3 - Alternating 800/922 2 Hz
  • 4 - Alternating 2400/2900 3Hz
  • 5 - Alternating 2500/3100 2Hz
  • 6 - Alternating 988/645 2Hz
  • 7 - Continuous 630
  • 8 - Continuous 922
  • 9 - Continuous 1200
  • 10 - Continuous 2810
  • 11 - Sweep 150-1000 Rising from 150Hz to 1Khz in 10s, 40s@1KHz, falling from 1KHz to 150Hz in 10s, 20s@150Hz. Period 80s
  • 12 - Intermittent 420 0.625s on, 0.625s off
  • 13 - Sweep 500-1200 0.25s off, 3.75s on
  • 14 - Intermittent 630 3.33Hz 150ms on, 150ms off
  • 15 - Intermittent 922 0.8Hz 0.25s on, 1s off
  • 16 - Intermittent 922 0.5Hz 1s on, 1s off
  • 17 - Intermittent 2810 1Hz
  • 18 - Intermittent 922 1Hz 500ms on, 500ms off
  • 19 - Intermittent 950 0.22Hz (0.5s on, 0.5s off) rptx3, 1.5s off
  • 20 - Continuous 800
  • 21 - Sweep 400-1200 (0.5s on, 0.5s off)*3, 1.5s off
  • 22- Sweep 1200-500 0.99Hz 1s on, 0.01s off
  • 23 - Sweep 2400-2850 7Hz
  • 24 - Sweep 500-1200 (0.5s off, 3.5s on)
  • 25 - Sweep 800-970 50Hz
  • 26 - Sweep 800-970 7Hz
  • 27 - Sweep 800-970 1Hz
  • 28 - Sweep 2400-2850 50Hz
  • 29 - Sweep 500-1000 7Hz
  • 30 - Sweep 500-1200-500 0.166Hz rise 1s, stable 4s, fall 1s
  • 31 - Sweep 800-1000 2Hz
  • 32 - Sweep 2400-2850 1Hz
567az/02
WWA-PC-I02

Wall Mounted Sounder Strobe with White Flash, Clear Lens, Isolated - Pure White Body (B501AP)

Notes:

  1. Meets the requirements of EN 54-23 at the following power settings:
  2. Low white output
  3. Medium white output
  4. High white output

    5. 2.     The wall mounted Visual Alarm Device (VAD) meets the requirements of EN 54-23 for the following light pattern details:

      -     High Performance setting - (Category W-4-11.5/W-2.4-11.5)

      -     Medium Performance setting - (Category W-3.8-9/W-2.4-9)

      -     Low Performance setting - (Category O-2.4-3)

      -     Synchronization

      -     Flash rate (0.5Hz & 1Hz)

    3.    Meets the requirements of EN 54-3 at the following tones:

    • 1 - Alternating 554/440 2Hz (100ms/400ms)
    • 2 - Alternating 800/922 1Hz
    • 3 - Alternating 800/922 2 Hz
    • 4 - Alternating 2400/2900 3Hz
    • 5 - Alternating 2500/3100 2Hz
    • 6 - Alternating 988/645 2Hz
    • 7 - Continuous 630
    • 8 - Continuous 922
    • 9 - Continuous 1200
    • 10 - Continuous 2810
    • 11 - Sweep 150-1000 Rising from 150Hz to 1Khz in 10s, 40s@1KHz, falling from 1KHz to 150Hz in 10s, 20s@150Hz. Period 80s
    • 12 - Intermittent 420 0.625s on, 0.625s off
    • 13 - Sweep 500-1200 0.25s off, 3.75s on
    • 14 - Intermittent 630 3.33Hz 150ms on, 150ms off
    • 15 - Intermittent 922 0.8Hz 0.25s on, 1s off
    • 16 - Intermittent 922 0.5Hz 1s on, 1s off
    • 17 - Intermittent 2810 1Hz
    • 18 - Intermittent 922 1Hz 500ms on, 500ms off
    • 19 - Intermittent 950 0.22Hz (0.5s on, 0.5s off) rptx3, 1.5s off
    • 20 - Continuous 800
    • 21 - Sweep 400-1200 (0.5s on, 0.5s off)*3, 1.5s off
    • 22- Sweep 1200-500 0.99Hz 1s on, 0.01s off
    • 23 - Sweep 2400-2850 7Hz
    • 24 - Sweep 500-1200 (0.5s off, 3.5s on)
    • 25 - Sweep 800-970 50Hz
    • 26 - Sweep 800-970 7Hz
    • 27 - Sweep 800-970 1Hz
    • 28 - Sweep 2400-2850 50Hz
    • 29 - Sweep 500-1000 7Hz
    • 30 - Sweep 500-1200-500 0.166Hz rise 1s, stable 4s, fall 1s
    • 31 - Sweep 800-1000 2Hz
    • 32 - Sweep 2400-2850 1Hz
567az/03
WWA-RC-I02

Wall Mounted Sounder Strobe with White Flash, Clear Lens, Isolated - Red Body (B501AP)

Notes:

1.      Meets the requirements of EN 54-23 at the following power settings:

  • Low white output
  • Medium white output
  • High white output

2.     The wall mounted Visual Alarm Device (VAD) meets the requirements of EN 54-23 for the following light pattern details:

  -     High Performance setting - (Category W-4-11.5/W-2.4-11.5)

  -     Medium Performance setting - (Category W-3.8-9/W-2.4-9)

  -     Low Performance setting - (Category O-2.4-3)

  -     Synchronization

  -     Flash rate (0.5Hz & 1Hz)

3.    Meets the requirements of EN 54-3 at the following tones:

  • 1 - Alternating 554/440 2Hz (100ms/400ms)
  • 2 - Alternating 800/922 1Hz
  • 3 - Alternating 800/922 2 Hz
  • 4 - Alternating 2400/2900 3Hz
  • 5 - Alternating 2500/3100 2Hz
  • 6 - Alternating 988/645 2Hz
  • 7 - Continuous 630
  • 8 - Continuous 922
  • 9 - Continuous 1200
  • 10 - Continuous 2810
  • 11 - Sweep 150-1000 Rising from 150Hz to 1Khz in 10s, 40s@1KHz, falling from 1KHz to 150Hz in 10s, 20s@150Hz. Period 80s
  • 12 - Intermittent 420 0.625s on, 0.625s off
  • 13 - Sweep 500-1200 0.25s off, 3.75s on
  • 14 - Intermittent 630 3.33Hz 150ms on, 150ms off
  • 15 - Intermittent 922 0.8Hz 0.25s on, 1s off
  • 16 - Intermittent 922 0.5Hz 1s on, 1s off
  • 17 - Intermittent 2810 1Hz
  • 18 - Intermittent 922 1Hz 500ms on, 500ms off
  • 19 - Intermittent 950 0.22Hz (0.5s on, 0.5s off) rptx3, 1.5s off
  • 20 - Continuous 800
  • 21 - Sweep 400-1200 (0.5s on, 0.5s off)*3, 1.5s off
  • 22- Sweep 1200-500 0.99Hz 1s on, 0.01s off
  • 23 - Sweep 2400-2850 7Hz
  • 24 - Sweep 500-1200 (0.5s off, 3.5s on)
  • 25 - Sweep 800-970 50Hz
  • 26 - Sweep 800-970 7Hz
  • 27 - Sweep 800-970 1Hz
  • 28 - Sweep 2400-2850 50Hz
  • 29 - Sweep 500-1000 7Hz
  • 30 - Sweep 500-1200-500 0.166Hz rise 1s, stable 4s, fall 1s
  • 31 - Sweep 800-1000 2Hz
  • 32 - Sweep 2400-2850 1Hz
567az/04
WRL-PC-I02

Wall Mounted Strobe with Red Flash, Clear lens, Isolated - Pure White Body (B501AP)

Notes:

1. The Wall mounted VAD meets the requirements of EN 54-23 for the following:

- Category rating W-3.6-10.5/W-2.4-10.5

- Synchronization

- Flash rate 0.5Hz

- Red LED

- Clear lens

567ah/08
WRL-RC-I02

Wall Mounted Strobe with Red Flash, Clear lens, Isolated - Red Body (B501AP)

Notes:

1. The Wall mounted VAD meets the requirements of EN 54-23 for the following:

- Category rating W-3.6-10.5/W-2.4-10.5

- Synchronization

- Flash rate 0.5Hz

- Red LED

- Clear lens

567ah/09
WWL-PC-I02

Wall Mounted Strobe with White Flash, Clear lens, Isolated - Pure White Body (B501AP)

Notes:

1. The Wall mounted VAD meets the requirements of EN 54-23 for the following:

- Category rating W-3.8-9/W-2.4-9

- Synchronization

- Flash rate 0.5Hz

- White LED

- Clear lens

567ah/10
WWL-RC-I02

Wall Mounted Strobe with White Flash, Clear lens, Isolated - Red Body (B501AP)

Notes:

1. The Wall mounted VAD meets the requirements of EN 54-23 for the following:

- Category rating W-3.8-9/W-2.4-9

- Synchronization

- Flash rate 0.5Hz

- White LED

- Clear lens

567ah/11

 

Bases/ Ancillaries
B501AP Mounting base - Low profile base IP21C
Bcc           Deep base IP44, cc indicates colour, RR=Red, DD=Detector White, PW=Pure White
Wcc          Waterproof base IP65, cc indicates colour, RR=Red, DD=Detector White, PW=Pure White

 


 

To read the Red Book section introduction click here.

 

< back to results page

< back to search page