Search by Certificate Number

Kentec Electronics Limited

Units 25-27
Fawkes Avenue
Questor
Dartford
Kent
DA1 1JQ
United Kingdom

Tel: +44 (0)1322 222121 • Fax: +44 (0)1322 291794
Email: sales@kentec.co.uk • Web: www.kentec.co.uk


Certificate No 360b to EN 54-2:1997 + A1:2006 and EN 54-4:1997 + A1:2002 + A2:2006
Certificate No 360d to EN 54-2:1997 + A1:2006, EN 54-4:1997 + A1:2002 + A2:2006, EN 12094-1:2003


Control and indicating equipment

Product Description LPCB
Ref. No.
Taktis

2 to 8 Loop Analogue Addressable Control and Indicating Equipment

2 to 16 Loop Analogue Addressable Control and Indicating Equipment

Incorporating the following units:

S721         LCD Main Processor Board

S722         Main Back Board

S723         Taktis Network, Ethernet & IFAM Interface Module

S758         Dual  loop Module

S769         System Board A module

S770         System Board B Module

S771         Zone LED Board

S787         Taktis Vision Unit

S768             Taktis Thermal Printer Assembly

S406-06         5.25 Amp Power Supply Unit

Incorporating the following optional modules:

S408-10         10.25 Amp Power Supply

S772                 16 Channel I/O card  

S791                 8w Relay card

S792                 8w conventional zone card

S788                 Media gateway card

S793                 4w sounder card

S786                 4 slot expansion board (used for extension for the optional I/O boards)

Certified with the following Options with requirements from EN 54-2:1997

7.8         Output to fire alarm device(s)

7.9.1         Output to fire alarm routing equipment

7.9.2         Alarm confirmation input from fire alarm routing equipment

7.10.3         Output to type C

7.10.4   Fault monitoring of fire protection equipment

7.11         Delay to outputs

7.12.1   Dependencies on more than one alarm signal - Type A

7.12.2   Dependencies on more than one alarm signal - Type B

7.12.3   Dependencies on more than one alarm signal - Type C

7.13         Alarm counter

8.3         Fault signals from points

8.9         Output to fault warning routing equipment

9.5         Disablement of addressable points

10         Test condition

Notes:

1. The CIE is approved with Hochiki & Argus Vega protocols via the S758 card.

2. Scope of certification does not include the operation of the network functionality.

3. This certificate does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13.

4. The Hochiki Latitude CIE is certified with the M5 & M6 shallow enclosure and D5 & D6 deep enclosure.

360b/01
Sigma ZXT

Conventional 3 Zone Control and Indicating Equipment & 1 Flooding Zone
Class A Extinguishant Control Panel (e.c.d)


Incorporating the following modules:

S2022         Mainboard

S406         5.25 Amp Power Supply Unit

S420        2 Amp Power Supply Unit

The Sigma ZXT has different part numbers which are details below:

K192311XM2         Conventional 3 Zone Control and Indicating Equipment & 1 Flooding Zone Class A Extinguishant Control Panel (e.c.d), Standard Enclosure, 2A PSU

K192311XM3         Conventional 3 Zone Control and Indicating Equipment & 1 Flooding Zone Class A Extinguishant Control Panel (e.c.d), Large Enclosure, 2A PSU

K195311XM3        Conventional 3 Zone Control and Indicating Equipment & 1 Flooding Zone Class A Extinguishant Control Panel (e.c.d), Large Enclosure, 5A PSU

K192312XM2         Conventional 3 Zone Control and Indicating Equipment & 1 Flooding Zone Class A Extinguishant Control Panel (e.c.d), Standard Enclosure, 2A PSU, Nordic Key Switch

K192312XM3         Conventional 3 Zone Control and Indicating Equipment & 1 Flooding Zone Class A Extinguishant Control Panel (e.c.d), Large Enclosure, 2A PSU, Nordic Key Switch

K195312XM3         Conventional 3 Zone Control and Indicating Equipment & 1 Flooding Zone Class A Extinguishant Control Panel (e.c.d), Large Enclosure, 5A PSU, Nordic Key Switch

Certified with the following Options with requirements from EN 54-2:1997

7.8        Output to fire alarm devices

7.11        Delays to outputs

10        Test condition

        

Certified with the following Options with requirements from EN 12094-1:2003

4.17        Delay of extinguishing signal

4.18        Signal representing the flow of extinguishing agent

4.19        Monitoring of the status of components

4.20        Emergency hold device

4.21        Control of flooding time

4.23        Manual mode only

4.25        Extinguishing signals to spare cylinders

4.27        Emergency abort device

4.30        Activation of alarm devices with different signals

Notes:

1. Scope of certification does not include the operation of the network functionality.

2. This certificate does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13.

3. The Sigma ZXT is certified with the M2 (standard) & M3 (large) enclosure

4. The S420 PSE can be fitted in either a M2 or M3 cabinet. The S406 can only be fitted in a M3 cabinet.

360d/01

 

 


 

To read the Red Book section introduction click here.

 

< back to results page

< back to search page