Search by Certificate Number

SHIELD FIRE, SAFETY AND SECURITY LIMITED

Redburn House
2a Tonbridge Road
Romford
Essex
RM3 8QE
United Kingdom

Tel: +44 1708 377731 • Fax: +44 1708 347637
Email: shielduk@shieldglobal.com • Web: www.shieldglobal.com


Certificate No 010m-(cl-2) to EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003
Certificate No 010bb-(cl-3) to EN 54-5:2000 + A1:2002, EN 54-7:2000 + A1:2002 + A2:2006, EN 54-17:2005 & CEA 4021:2003
Certificate No 010h-(cl-3) to EN 54-5:2000 + A1:2002, EN 54-7:2000 + A1:2002 + A2:2006 & CEA 4021:2003
Certificate No 928m-(cl-12) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-25: 2008 and CEA 4021: 2003


Multi-Sensor/Multi-Criteria Detectors

Product Description LPCB
Ref. No.
SEN-A4015

Analogue Addressable Multisensor Detector

(SEN-A4001 mounting base)

Certified with digital communication protocol that has been configured for the multisensor detector in accordance with manufacturer's instructions.

010m/01
TEN-A8013

Multisensor Detector with Isolator (TEN-A8030 base)

Certified at the following settings:

Mode 1: High sensitivity smoke detector with high heat enhancement

Mode 2: Standard smoke sensitivity only

Mode 3: Medium sensitivity smoke detector with medium heat enhancement

Mode 4: Low sensitivity smoke detector with high heat enhancement

Mode 5: Class A1R heat detector

010bb/01
SIL-A8023

SIL Multisensor Detector (SEN-A4001 mounting base)

Notes:

  1. Certified at the following settings:

Mode 1 - High sensitivity smoke detector with standard heat enhancement

Mode 2 - Smoke detection only

Mode 3 - Medium sensitivity smoke detector with standard heat enhancement

Mode 4 - Low sensitivity smoke detector with high heat enhancement

Mode 5 - Class A1 heat detector

Also approved in conventional alarm modes 1, 2, 3, 4 and 5

2. Approved with Apollo Discovery, XP95, and S90 digital communication protocols that have been configured for the Discovery multisensor detector in accordance with manufacturer's instructions.

010h/01
SW-3220

Wireless Addressable Multicriteria Detector

Notes:

      1.   Meets the requirements of EN 54-5 for Class A1R

      2.   Meets the requirements of EN 54-7 at the following sensitivity settings:

      Level 1 - High

      Level 2 - Normal

      Level 3 - Low

      3.   The device must be used with the following battery type only:

      CR123A (3 Vdc) - Primary and Secondary Battery

928m/02

 

    Bases:
SEN-A4001    Addressable mounting base
    TEN-A8030    Standard Mounting Base
WAB100     Wireless Adaptor Base

 


 

To read the Red Book section introduction click here.

 

< back to results page

< back to search page