Search Results
Search by Certificate Number
Kidde Fire Protection
1st Floor Stokenchurch House
Oxford Road
Stokenchurch
High Wycombe
Buckinghamshire
HP14 3SX
United Kingdom
Tel: +44 (0)1494 480410
Email: General.enquiries@kiddeuk.co.uk
•
Web: www.kfp.co.uk
Certificate No 594e to LPS 1230
Kidde Inert Gas System (400 Series) - IG100
| Product |
Risk |
Design Concentration |
Comments |
LPCB Ref. No. |
|---|---|---|---|---|
| IG-100 |
Class A Standard (Solid fires e.g. Paper, wood, plastics) |
38.9 % |
Design concentration includes 30% safety factor |
594e/03 |
| IG-100 |
Class A Cables (Solid fire risks including Cables) |
43.2 % |
Confirmation that minimum safety factor is adequate |
594e/03 |
| IG-100 |
Class B (Liquid Fires e.g. heptane) |
46.0 % |
Design concentration includes 30% safety factor |
594e/03 |
Notes:
This system is suitable for storage in environmental conditions from -20°C to +50°C
Storage pressure is specified as 200 bar or 300 bar @ 15°C. System pressure is specified as 55 bar.
This system uses:
Components as listed in Part 4, Section 2.1 and as described in
Kide Fire Protection Inert Gas System (400 Series) Design, Installation, Operation and Maintenance Manual:
P/N 06-237518-001, dated July 2018, Revision AA which utilises the following software
Licensed to Kidde Fenwal
Copyright: Jensen Hughes Inc
Design concentration Class A Standard and Class B = Extinguishing concentration x safety factor (minimum 1.3).
Design concentration Class A Cables System test concentration. Where this value is lower than the Class A Standard value, the Class A Standard value should be used for design purposes.
Design concentrations are as tested to LPS 1230 in BRE Test Report Number P102562-1002.
Extinguishing concentrations are as verified in BRE Test Report Number P102562-1001
To read the Red Book section introduction click here.
