Search by Certificate Number

Eurotech Fire Systems Limited

19/20 Stratfield Park
Elettra Avenue
Waterlooville
Hampshire
PO7 7XN
United Kingdom

Tel: +44 (0)203 141 0999 • Fax: +44 (0)239 225 2554
Email: MICHELLE.AGIUS@eurotechfire.com • Web: www.eurotechfire.com


Certificate No 1213a to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006 and EN 54-4: 1998 + A1: 2002 + A2: 2006


Control and indicating equipment

Product Description LPCB
Ref. No.
500-0205A Odyssey

Two loop, 32 Zone analogue addressable control and indicating equipment

Incorporating the following units:

BRD82MBA Main Termination Board

BRD82ZICC Zone Interface & Control Card

PSU2397 Power Supply Unit

8210-0001 2nd loop activation Key

BRD82LSD Loop Activation Board

ASS82ZICC Zone Indicator & LCD Assembly (8210)

Certificated with the following options with requirements from EN54-2:

7.8 Output to fire alarm devices

7.9.1 Output to fire alarm routing equipment

7.9.2 Alarm confirmation input from fire alarm routing equipment

7.11 Delay to outputs

7.12.1 Dependencies on more than one alarm signal Type A

7.12.2 Dependencies on more than one alarm signal Type B

7.12.3 Dependencies on more than one alarm signal Type C

8.3 Fault signal from points

8.9 Output to fault warning routing equipment

9.5 Disablement of each addressable point

10 Test condition

Note:

1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13

1213a/02
500-0105A Odyssey

32 Zone analogue addressable control and indicating equipment

Incorporating the following units:

BRD82MBA Main Termination Board

BRD82ZICC Zone Interface & Control Card

PSU2397 Power Supply Unit

1213a/01

ASS82ZICC Zone Indicator & LCD Assembly (8210)

Certificated with the following options with requirements from EN54-2:

7.8 Output to fire alarm devices

7.9.1 Output to fire alarm routing equipment

7.9.2 Alarm confirmation input from fire alarm routing equipment

7.11 Delay to outputs

7.12.1 Dependencies on more than one alarm signal - Type A

7.12.2 Dependencies on more than one alarm signal - Type B

7.12.3 Dependencies on more than one alarm signal - Type C

8.3 Fault signal from points

8.9 Output to fault warning routing equipment

9.5 Disablement of each addressable point

10 Test condition

Note:

1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13.

1213a/01

 

 


 

To read the Red Book section introduction click here.

 

< back to results page

< back to search page