Our Standards are produced to help ensure that a product or service meets the needs of users or where a new unproven technology is introduced.
Loss Prevention Standards
The Loss Prevention Standards (LPS) are for information only and should not be used for any other purpose. Their use is subject to interpretation by our experts, and we take no responsibility for their use by others.
Building Product Standards
We also have a number of Building Product Standards (BPSs) which have been developed for products and systems where there were no directly applicable recognised standard.
Environmental Standards
BRE Global also offers certification of products and services that can help to reduce their impact on the environment. These can be accessed free of charge at http://www.greenbooklive.com/
NOTE
Any distribution or use of any of the material in our standards may only be done with the written permission of BRE Global Ltd. Those wishing to use or reproduce this standard for any purpose should apply to enquiries@breglobal.com for training, assessment and a licence. A fee will normally be payable.
Standard number |
Title |
CoP 0001 Issue 1.0
|
Code of Practice for visual alarm devices used for fire warning
|
LPS 1014 Issue 5.4
|
Requirements for certificated fire detection and alarm systems firms
|
LPS 1036 - 2.2
|
Quality schedule for the certification of automatic fire sprinklers
|
LPS 1039 - 5.2
|
Requirements and testing methods for automatic sprinklers
|
LPS 1040 - 2.3
|
Requirements and testing procedures for the LPCB approval and listing of wet alarm valve sets
|
LPS 1041 - 1.3
|
Requirements and testing procedures for the LPCB approval and listing of dry pipe valve sets
|
LPS 1045 - 1.3
|
Requirements and testing procedures for the LPCB approval and listing of direct reading flow meters
|
LPS 1048 - 5.0
|
Requirements for the approval of sprinkler system contractors in the UK and Ireland
|
LPS 1054 - 2.3
|
Requirements and testing procedures for the LPCB approval and listing of component compatibility for fire detection and alarm systems
|
LPS 1056 - 6.2
|
Requirements for the LPCB approval and listing of fire doorsets, lift landing doors and shutters
|
LPS 1107 - 1.2
|
Requirements, tests and methods of assessment of passive fire protection systems for structural steelwork
|
LPS 1131 - 2.0
|
Requirements and testing methods for pumps for automatic sprinkler installation pump sets
|
LPS 1132 - 4.2
|
Requirements and tests for LPCB approval of wall and floor penetration and linear gap seals
|
LPS 1148 - 1.1
|
Requirements for contractors engaged in the design installation, commissioning and servicing of automatic sprinkler systems
|
LPS 1158 - 2.2
|
Requirements and tests for fire resistant glazing systems
|
LPS 1162 - 4.1
|
Requirements and tests for the LPCB approval and listing of fire dampers
|
LPS 1175 - 8.1
|
LPS 1175- 8.1 Requirements and testing procedures for the LPCB certification and listing of intruder resistant building components, strongpoints, security enclosures and free-standing barriers
|
LPS 1181 Part 1 - 1.2
|
Requirements and tests for built up cladding and sandwich panel systems for use as the external envelope of buildings
|
LPS 1181 Part 2 - 2.1
|
Requirements and tests for sandwich panels and built up systems for use as internal constructions in buildings
|
LPS 1182 - 2.2
|
Requirements and tests for LPCB approval of fixed fabric smoke curtains, fixed metal smoke curtains and powered smoke curtains
|
LPS 1183 - 4.3
|
Requirements and testing procedures for the LPCB approval and listing of safe storage units
|
LPS 1185 - 3.2
|
Requirements and testing methods for remote monitored gear operated butterfly stop valves
|
LPS 1186 - 3.1
|
Requirements and testing methods for check valves
|
LPS 1194 - 1.2
|
Requirements and testing methods for pipe hangers
|
LPS 1195 Part 1 - 4.1
|
Fire test and evaluation requirements for the LPCB approval and listing of temporary buildings for use on construction sites
|
LPS 1197 - 4.2
|
Requirements for the LPCB approval and listing of companies inspecting, repairing and maintaining fire and security doors, doorsets, shutters and active smoke/fire barriers.
|
LPS 1204 - 3.2
|
Requirements for firms engaged in the design installation, commissioning and servicing of gas extinguishing systems
|
LPS 1207 - 3.1
|
Fire requirements for the LPCB approval and listing of protective covering materials
|
LPS 1208 - 2.2
|
LPCB fire resistance requirements for elements of construction used to provide compartmentation
|
LPS 1214 - 2.2
|
Specification for testing and classifying physical protection devices for personal computers and similar equipment
|
LPS 1215 - 4.1
|
Requirements for the LPCB approval and listing of scaffold cladding materials
|
LPS 1219 - 3.1
|
Requirements and testing procedures for the LPCB approval and listing of pipe couplings
|
LPS 1223 - 2.3
|
Requirements and testing procedures for the LPCB certification and listing of fixed fire extinguishing systems for catering equipment
|
LPS 1224 - 3.1
|
Requirements for companies providing secure asset registration services
|
LPS 1225 - 3.2
|
Requirements for the LPCB approval and listing of asset marking systems
|
LPS 1228 - 1.2
|
Specification for testing and classifying the burglary resistance of office furniture - lightweight containers
|
LPS 1230 - 1.2
|
Requirements for fire testing of fixed gaseous fire extinguishing systems
|
LPS 1236 - 2.0
|
Requirements for control panels for diesel engine driven pumps used in automatic sprinkler installations
|
LPS 1237 - 2.0
|
Requirements for control panels for electric motor driven pumps used in automatic sprinkler installations
|
LPS 1239 - 1.2
|
Requirements and testing procedures for the LPCB approval and listing of diesel engines for sprinkler pump sets
|
LPS 1240 - 1.2
|
Requirements for LPCB approved fire sprinkler pump sets used in automatic sprinkler installations
|
LPS 1242 - 2.1
|
Requirements and testing procedures for the LPCB approval and listing of cylinders for locks
|
LPS 1254 - 1.3
|
Requirements for the certification of suction tanks for automatic pumps
|
LPS 1257 - 1.1
|
Requirements and testing procedures for radio linked fire detection and fire alarm equipment
|
LPS 1258 - 1.2
|
Requirements and test methods for automatic sprinkler glass bulbs with a narrow operating temperature band
|
LPS 1259 - 1.2
|
Fire detection and alarm systems for buildings
|
LPS 1260 - 3.1
|
Plastic pipe and fittings for use in automatic sprinkler systems
|
LPS 1261 - 1.2
|
Requirements for testing flexible hoses for sprinkler systems
|
LPS 1263 - 1.4
|
Requirements for the LPCB approval and listing of the fire performance of grease filters used in commercial kitchen extract systems
|
LPS 1265 - 1.1
|
Requirements and testing procedures for the LPCB approval and listing of carbon monoxide fire detectors using electrochemical cells
|
LPS 1270 - 1.1
|
Requirements and testing procedures for the LPCB approval and listing of intruder resistant security glazing units
|
LPS 1271 - 2.3
|
Requirements for the LPCB approval and listing of companies installing fire and security doors, doorsets, shutters and active smoke/fire barriers
|
LPS 1274 - 1.1
|
Testing procedures for the LPCB approval and listing of carbon monoxide / heat multisensor fire detectors using electrochemical cells
|
LPS 1276 - 2.0
|
Requirements for the LPCB certification and listing of above ground suction tanks for sprinkler systems
|
LPS 1277 - 4.1
|
Requirements for LPCB certification and listing of Supervised Premises Transceivers
|
LPS 1279 - 1.1
|
Testing procedures for the LPCB approval and listing of point multisensor fire detectors using optical or ionization smoke sensors and electrochemical cell CO sensors and, optionally, heat sensors
|
LPS 1280 - 1.1
|
Testing procedures for the LPCB approval and listing of duct smoke detectors using point smoke detectors
|
LPS 1282 - 1.1
|
Requirements and testing procedures for combined domestic smoke and carbon monoxide detectors
|
LPS 1283 - 1.1
|
Requirements and test methods for the approval of watermist systems for use in commercial low hazard occupancies
|
LPS 1301 - 1.1
|
Requirements for the approval of sprinkler installers in the UK and Ireland for residential and domestic sprinkler systems
|
LPS 1500 - 2.1
|
Requirements for the LPCB approval and listing of companies installing construction elements used to provide compartmentation in buildings
|
LPS 1501 - 1.1
|
Fire test and performance requirements for innovative methods of building construction
|
LPS 1505 - 1.1
|
Requirements and tests for the LPCB approval and listing of roofing systems - protection against fire from outside the building.
|
LPS 1531 - 1.2
|
Requirements for the LPCB approval and listing of companies installing or applying passive fire protection products
|
LPS 1581 - 2.1
|
Requirements and tests for LPCB approval of non-load bearing external cladding systems applied to the masonry face of a building
|
LPS 1582 - 1.1
|
Requirements and tests for LPCB approval of non-load bearing external cladding systems fixed to and supported by a structural steel frame
|
LPS 1650 - 1.1
|
Requirements and testing procedures for the LPCB approval and listing of 'Theft Resistant' electronic products
|
LPS 1653 - 1.1
|
Requirements and testing procedures for the LPCB approval and listing of fire detection and fire alarm network systems
|
LPS 1654 - 1.1
|
Requirements and testing procedures for the LPCB approval and listing of padlocks
|
LPS 1655 - 1.0
|
Requirements and test methods for the LPCB approval and listing of personal protection watermist systems
|
LPS 1666 - 1.0
|
Requirements and test procedures for the LPCB approval of direct low pressure (DLP) application fixed fire suppression systems
|
LPS 2081 - 1.0
|
Requirements and testing procedures for the LPCB approval and listing of building components, strongpoints, security enclosures and free-standing barriers offering resistance to intruders attempting to use stealth to gain entry
|
LPS 2082 - 1.0
|
SABRE - Security Assessment Standard for Buildings & Built Infrastructure Assets
|
LPS 2084 - 1.0
|
Requirements for the LPCB approval and listing of companies carrying out inspection, cleaning and maintenance of ductwork systems
|