Search by Certificate Number

Tyco Building Services Products B.V. part of the Johnson Controls group of Companies

Kopersteden 1
7547 TJ Enschede
The Netherlands

Tel: +31 53 4284444 • Fax: +31 53 4283377
Email: info-NL@tyco-bspd.com • Web: www.tycobuilding.com


Certificate No 169g to TS1599 Issue draft 5


Grinnell G-Press Lightweight Stainless Steel Sprinkler Pipework System

Product

Size/mm

LPCB
Ref. No.
Pipe SS (1.4401)

22, 28, 35, 42, 54

169g/01
G05 Straight Coupling (2 x Press)

22, 28, 35, 42, 54

169g/02
G10 Slip Coupling (2 x Press)

22, 28, 35, 42, 54

169g/03
G15 90° Elbow (2 x Press)

22, 28, 35, 42, 54

169g/04
G16 90° Elbow (Press x plain end)

22, 28, 35, 42, 54

169g/05
G20 45° Elbow (2 x Press)

22, 28, 35, 42, 54

169g/06
G21 45° Elbow (Press x plain end)

22, 28, 35, 42, 54

169g/07
G25 90° Bend (2 x plain end)

22, 28, 35, 42, 54

169g/08
G26 60° Bend (2 x plain end)

28, 35, 42, 54

169g/09
G27 30° Bend (2 x plain end)

28, 35, 42, 54

169g/10
G28 15° Bend (2 x plain end)

28, 35, 42, 54

169g/11
G30 Cross over (2 x plain end)

22, 28

169g/12
G35 Tee equal (3 x Press)

22, 28, 35, 42, 54

169g/13
G36 Tee reduced (3 x Press)

28x22x28, 35x22x35, 35x28x35, 42x22x42,42x28x42, 42x35x42, 54x22x54, 54x28x54, 54x35x54, 54x42x54

169g/14
G37 Tee threaded (Press x fem. thread x Press)

22x1/2"x22, 22x3/4"x22, 28x1/2"x28, 28x3/4"x28, 28x1"x28, 35x1/2"x35, 35x3/4"x35, 35x1x35, 42x1/2"x42,  42x3/4"x42, 42x1"x42, 54x1/2"x54, 54x3/4"x54, 54x1"x54, 54x2"x54

169g/15
G40 Reducer (Large Plain end x Press)

28x22, 35x22, 35x28, 42x28, 42x35, 54x35, 54x42,

169g/16
G46 Straight connector (Press x female thread)

22x½", 22x¾", 22x1", 28x¾", 28x1", 28x1¼", 35x1", 35x1¼", 35x1½", 42x1¼",  42x1½", 54x1½", 54x2"

169g/17
G45 Straight connector (Press x male thread)

22x½", 22x¾", 22x1", 28x¾", 28x1", 28x1¼", 35x1", 35x1¼", 35x1½", 42x1¼", 42x1½", 54x1½", 54x2"

169g/18
G47 Straight union (Press x male thread)

22x½", 22x¾", 22x1", 28x1", 35x1¼", 42x1½", 54x2"

169g/19
G51 Straight union (Press x female thread)

22x¾", 22x1", 28x1", 35x1¼", 42x1½", 54x2"

169g/20
G19 90° Angle adaptor (Press x male thread)

22x¾", 28x1", 35x1¼", 42x1½", 54x2"

169g/21
G14 90° Angle adaptor (Press x female thread)

22x½", 22x¾", 28x½", 28x¾", 28x1", 35x½", 35x¾", 35x1", 35x1¼"

169g/22
G17 90° Elbow (Press x male thread)

22x¾", 28x1", 35x1¼", 42x1½", 54x2",

169g/23
G18 90° Elbow (Press x female thread)

22x½", 22x¾", 28x½", 28x¾", 28x1", 35x½", 35x¾", 35x1", 42x1½", 54x2",

169g/24
G48 Straight connector (Press x grooved)

28x33.7, 35x42.4, 42x48.3, 54x60.3

169g/25
G50 Stop end (1 x press)

22, 28, 35, 42, 54

169g/26

 

Notes

1.    The above Grinnell G-Press pipework and fittings are to be installed using the Novopress ECO301 pressing tool in accordance with the Grinnell G-Press User Manual.  The tools shall be serviced and maintained in accordance with the manufacturer's stated guidelines.
2.   Grinnell G-Press pipework and fittings may only be installed by LPCB Approved Sprinkler Contractors who have undergone adequate training by the manufacturer.
3.   Grinnell G-Press pipework and fittings shall be installed in accordance with the Grinnell G-Press user Manual: Issue TYCENPRESS-10/11.
4.   Grinnell G-Press pipework and fittings shall be installed and maintained in conformance with the LPC Rules for Automatic Sprinkler Installations.
5.   The use of Grinnell G-Press Sprinkler System pipework and fittings shall be recorded on LPS1048 certificates of conformity.
6.   Where a Grinnell Reducer is installed, a pipe hanger shall be used adjacent to the reducer on the larger pipe.
7.   Where Grinnell system pipework is connected to sprinklers in suspended ceilings, only LPCB Approved flexible drops shall be used.
8.   Grinnell G-Press pipework and fittings are not compatible with lightweight piping systems from other manufacturers.

 


 

To read the Red Book section introduction click here.

 

< back to results page

< back to search page